Adn432 Top -

| Parameter | Value (ADN432 TOP) | Standard Grade | | :--- | :--- | :--- | | | 3.0V to 5.5V (Top performance at 5.0V) | 2.7V to 5.5V | | Quiescent Current | 1.2 mA (typical) | 1.8 mA | | Output Drive Capability | ±50 mA per channel | ±35 mA | | Propagation Delay | 8 ns (max) | 12 ns | | Thermal Resistance (θJA) | 45°C/W | 65°C/W | | ESD Rating | HBM ±8kV / CDM ±2kV | HBM ±2kV |

| Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | ( >90°C) | Output shorted to ground or capacitive load too high | Check solder bridges; reduce load capacitance to <50pF | | Output oscillation | Insufficient decoupling or long feedback loop | Move 0.1µF cap closer to Vcc; shorten trace length | | Slow rise time | Supply voltage drooping or undersized Vcc trace | Increase trace width; add bulk capacitance (100µF) | | No output | Enable pin floating or incorrect logic level | Pull enable pin high (to Vcc) via a 10kΩ resistor | Comparing ADN432 TOP to Competitors How does the ADN432 TOP stack up against industry alternatives from Texas Instruments or Analog Devices? adn432 top

For patient monitoring systems (ECG/EKG) and portable defibrillators, noise rejection is life-critical. The ADN432 TOP provides the low-noise amplification needed to pick up microvolt-level biopotential signals without artifact. | Parameter | Value (ADN432 TOP) | Standard