Pan186cv Datasheet — New
| Parameter | Old Revision (Rev A) | | Impact | | :--- | :--- | :--- | :--- | | Quiescent Current (Standby) | 5 mA | 1.8 mA | Better battery life in standby | | Shutdown Current | 80 µA | 3 µA | Critical for low-power IoT devices | | Feedback Voltage Tolerance | ±4% | ±2% | Improved output regulation | | Thermal Shutdown Temp | 150°C | 165°C | Higher headroom for hot environments | | ESD (HBM) | 2 kV | 4 kV | More robust handling | Note: The "new" datasheet also explicitly warns against floating the Enable (EN) pin —a common error in older designs. The EN pin now has an internal 5 µA pull-up current; leave it open for auto-start or drive high for operation. 3. Pin Configuration (Top View - TO-252-5L) The new Pan186CV uses a 5-pin TO-252 package. Here is the updated pinout from the datasheet:
Publication Date: June 2026 Component Status: Active / New Revision pan186cv datasheet new
| Pin No. | Symbol | Description | | :--- | :--- | :--- | | 1 | | Supply input (4.5V to 40V). Bypass with 10µF + 0.1µF ceramic near pin. | | 2 | SW | Switching node. Connect to inductor (33µH–100µH typical). | | 3 | GND | Power ground. Must be connected to exposed thermal pad. | | 4 | FB | Feedback input. Connect resistor divider (Vout = 1.23V * (1 + R1/R2)). | | 5 | EN | Enable input. Logic high (>1.6V) to enable; low (<0.8V) to disable. | | Parameter | Old Revision (Rev A) |
$25 for an instant takedown?
We offer an instant takedown service which you can purchase (via Paypal) to have an infringing file removed immediately.
This service also alleviates you of the need to be the direct copyright holder, and of any legal responsibilities.
No thanks
If you are happy to wait the 10 days it takes us on average to process these requests manually, then you have nothing left to do.
Your file will be removed if we feel it violates the relevant copyright law; we may or may not contact you to confirm this.