Yfs201 Proteus Library ✔

lcd.setCursor(0, 0); lcd.print("Flow: "); lcd.print(flowRate); lcd.print(" L/min ");

void setup() pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, RISING); lcd.begin(16, 2); lcd.print("Flow Meter Ready"); delay(2000); lcd.clear(); oldTime = millis(); yfs201 proteus library

void pulseCounter() pulseCount++;

void loop() if (millis() - oldTime >= 1000) detachInterrupt(0); lcd.print(" L/min ")

| Issue | Impact | |-------|--------| | No fluid viscosity model | Cannot simulate real-world turbine lag | | Perfect square wave | Real sensor has jitter, voltage droop | | No temperature compensation | Real sensor output drifts with temp | | Limited community libraries | Some versions are buggy or untested | | No pressure drop model | Simulation ignores backpressure | void setup() pinMode(2